Scotgrip International

Scotgrip International manufactures heavy duty, anti-slip safety products. Scotgrip’s products are designed to help mitigate slips, trips and falls. Scotgrip designs and manufactures its products from start to finish using ISO 9001, 14001 & 45001 quality-controlled processes and is an accredited Carbon Neutral company.

Baker Hughes NovaLT™ Gas Turbines

Baker Hughes NovaLT™ gas turbines are setting new standards in efficiency, availability, reliability, and flexibility, while minimizing total costs of ownership.

With a rapid 45-day installation window, an outstanding 35,000-hour mean time between maintenance, and 24-hour engine swap capability,  Baker Hughes’ NovaLT™ turbines set the benchmark for functionality, availability, reliability, and high performance.

NovaLT™ turbine manufacturing processes—including factory acceptance tests—have achieved significant reductions in greenhouse gas (GHG) emissions: 16% lower on average for the NovaLT™12 and 35% lower for the NovaLT™16, compared to legacy technologies like the PGT10 turbine. Additionally, these gas turbines are engineered to operate at 9 ppm NOx @15% O₂ when running on natural gas (from 50% to 100% load), supporting both mechanical drive and power generation applications.

The NovaLT™16 turbine can start up and burn gas blends up to 100% hydrogen. It can also switch from natural gas to blends, or 100% hydrogen, with no hardware changes.

Petreven

Petreven is a drilling contractor that develops and optimizes drilling services utilizing the new generations hydraulic drilling rigs HH type, manufactured by Drillmec.

The main objective of Petreven is to provide low impact drilling services in those areas where the use of its technology and expertise can increase drilling performance, reduce costs, improve safety standards and protect the environmental.

Petreven has a long-standing tradition in offering a range of workover operations. Over the past 5 years, the company performed more than 250 workovers and well completions for different companies in South America.

Petreven offers solutions for the following categories: Energy Companies, Drilling, Oil Service Companies and Onshore.

Drillmec

Drillmec designs, manufactures, and integrates full drilling rigs and workover packages for onshore and offshore applications. The company draws on more than 100 years of experience and supplies drilling contractors and oil companies with complete, single-source equipment packages.

Drillmec’s offshore equipment line covers platforms, jack-ups, barges, semisubmersibles, and drill ships, built to handle a wide range of E&P and production requirements. From well head to crown, the scope includes mud systems, mud pumps up to 2,200 hp, drawworks packages up to 4,600 hp, control rooms, derricks, pipe handling systems, power tongs, and rotary tables.

The HH Series hydraulic rig range delivers top drive torque from 13,560 Nm to 52,230 Nm, operating speeds of 120 to 200 rpm, and hook load ratings from 55 to 317 metric tons. DEEP, Drillmec’s Embedded Efficiency Platform, applies data-driven pattern recognition to support drilling process optimization from the control room.

Beyond equipment supply, Drillmec completes Pre-FEED, FEED, and EPC scopes for drilling packages, covering projects from early engineering through full execution. This allows operators to source rig design, manufacturing, and project delivery from a single supplier.

Drillmec has solutions for Energy Companies, Drilling and Onshore categories, spanning new rig construction, workover operations, and rig upgrades across onshore and offshore fields.

For onshore or offshore drilling rig requirements, talk to an M&O expert to match Drillmec’s equipment to your project scope.

Stenca

Stenca is a leading provider of pipe insulation and tank insulation solutions for ships, offshore platforms, drilling rigs, FPSOs, and onshore terminals.

Our high-performance insulation systems comply with strict marine and offshore standards, delivering superior thermal efficiency, corrosion protection, and long-lasting durability even in the most challenging environments.

With DNV GL-certified quality management and decades of proven expertise, Stenca is the trusted partner for energy companies, EPC contractors, drilling operators, FPSO owners, oil service providers, shipyards, and onshore facilities worldwide.

We combine technical excellence with industry-leading materials to ensure optimal performance and cost-effective insulation solutions across the energy and maritime sectors.

DESMI

DESMI Marine Pumps cover marine and industrial applications, including oil spill combat, defence, and fuel handling. The range is engineered for trouble-free operation, low energy consumption, and consistent performance across marine environments.

DESMI’s pump portfolio addresses marine and industrial requirements across multiple vessel types and shore-based operations. The lineup prioritizes energy efficiency and dependable output across varying operating conditions.

Beyond standard marine use, DESMI Marine Pumps support oil spill combat operations, defence applications, and fuel handling. These use cases require equipment suited to demanding and often critical operating environments.

DESMI’s solutions serve Energy Companies, EPC Contractors, Drilling Operators, FPSO Owners, Vessel Owners, Oil Service Companies, Shipyards, and Onshore and Offshore Wind operators.

For technical specifications and pump selection support, talk to an M&O expert.

See more: DESMI

PCM

PCM is specialized in pumping solutions for the lifting, transferring, mixing and dosing of abrasive, fragile, viscous, corrosive, hot or heavy products. PCM uses Eco-Design to develop solutions that offer lower Life Cycle Costs. For more than 85 years, PCM has been offering high quality, cost effective fluid handling solutions based on low life-cycle costs to our customers in oil & gas industry.

PCM offers solutions for the following categories: Energy Companies, EPC, Drilling and Onshore.

LIFTMAN FOLD™

LIFTMAN FOLD ™ is the pneumatically operated access platform manufactured by Reglo AS and distributed worldwide. The platform is designed for offshore and onshore oil and gas installations and chemical plant segments. Reglo AS is ISO 9001:2015 certified.

LIFTMAN FOLD ™ supports access tasks at offshore and onshore oil and gas installations and at chemical plants. Pneumatic operation drives the unit, which ships worldwide.

Reglo AS holds ISO 9001:2015 certification, covering the company’s quality management system.

Reglo AS supplies its solutions to Energy Companies, EPC Contractors, Drilling Operators, FPSO Owners, Oil Service Companies and Onshore operations.

For access platform solutions across offshore and onshore oil and gas operations, talk to an M&O expert.

Daeyang

Since its foundation in 1977, Daeyang has been at the pioneering forefront of technology and design, providing cutting-edge LED lighting solutions for offshore facilities, naval vessels, and industrial environments.

Specialising in marine lighting, communication systems, power systems, underwater systems, and industrial sensors, the company develops high-quality, innovative products.

Daeyang has earned over 2,230 international certifications, including IECEx, ATEX, ISO 14001, ISO 45001, ILAC/MRA, and various class certificates that demonstrate the superior performance, safety, and quality of its products and technologies.

Committed to ongoing technological innovation, Daeyang continuously develops state-of-the-art solutions that serve society and drive the future of offshore and naval lighting systems.

Daeyang offers solutions for the following categories: Energy Companies, EPC, Drilling, FPSO Owners, Vessel Owners, Shipyards, and Onshore. Talk to an M&O expert to discuss Daeyang LED lighting and system specifications for your project.

See more: Daeyang

Ace Well Technology

Ace Well Technology, founded in 2012, develops easy-to-install tools that anchor accessories to tubing. The company serves energy companies, drilling operations, subsea projects, oil service companies and onshore applications, supporting well construction and completion.
At the core is the patented Ace Ratchet Collar (ARC) locking mechanism. It attaches tools and accessories to casing or completion strings. The system delivers high holding force and reliable performance in demanding well environments.

The proven strength of the ARC keeps tools securely fixed in place. This safeguards the structural integrity of the well and provides lasting performance across the completion string.
The portfolio covers five categories: energy companies, drilling, subsea, oil service companies and onshore. Each tool is built for straightforward installation and consistent anchoring.

Talk to an M&O expert about integrating Ace Well Technology tools into your well program.